{
  "name": "Gweike M-Series Laser Manual & Troubleshooting Wiki",
  "canonical": "https://gweike-m-series.theyieldpoint.com/",
  "scope": "M2, M2 Pro, M2 Max, M2 Ultra, M3, M3 Pro, M3 Max, M3 Ultra; M800 and M1200 source workflows where stated",
  "independence": "Independent owner resource by The Yield Point; not an official Gweike manual.",
  "safety": "Never bypass an interlock or safety input. Stop for uncontrolled emission/motion, damaged optics/fiber, fire, leaks near electricity, or safety faults. Use qualified trades and local rules.",
  "official_manual": "https://dns.gweikecloud.com/static/service/Gweike-M-Series-User-Manual.zip",
  "updated": "2026-08-21",
  "guide_count": 38,
  "guides": [
    {
      "title": "How to Calibrate the Gweike M-Series FTC Cutting Head",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/calibrate-ftc-head/",
      "description": "Safely calibrate the M-Series floating cutting head, recognize a trustworthy result, and stop for FTC signal or collision symptoms.",
      "evidence": "Official manual procedure + fault isolation",
      "models": "M-Series CNC configurations with FTC height control",
      "safety": "Moving head and crash prevention",
      "source": "Manual section 10",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "FTC"
      ]
    },
    {
      "title": "How to Check Gweike M-Series X/Y Scale and Kerf",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/check-scale-and-kerf/",
      "description": "Use a simple test coupon to separate drawing-unit, axis-scale, mechanical, and kerf-compensation errors on a Gweike M-Series.",
      "evidence": "Owner question + standard measurement method",
      "models": "CNC-equipped M2 and M3 families",
      "safety": "Supervised test cutting and sharp hot parts",
      "source": "Community question, independently developed method",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "rotary axis",
        "maintenance"
      ]
    },
    {
      "title": "How to Cut and Engrave in Gweike mLaser",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/cut-and-engrave/",
      "description": "A step-by-step M-Series mLaser workflow for importing, scaling, layering, sorting, simulating, framing, cutting, and engraving.",
      "evidence": "Official manual procedure, independently rewritten",
      "models": "CNC-equipped M2 and M3 families",
      "safety": "Supervised enclosed laser operation",
      "source": "Manual section 6",
      "updated": "2026-08-21",
      "keywords": [
        "mLaser",
        "cutting",
        "engraving",
        "focus",
        "gas"
      ]
    },
    {
      "title": "Fix Gweike M-Series Dross, Blowouts, and Incomplete Cuts",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/cut-quality-troubleshooting/",
      "description": "Diagnose Gweike M-Series fiber cut problems by symptom without blindly increasing power: optics, nozzle, focus, gas, speed, material, and cooling.",
      "evidence": "Manual-derived workflow + field-tested diagnostic method",
      "models": "Fiber-equipped M2 and M3 families",
      "safety": "Hot sharp coupons, fire, high-pressure gas, laser radiation",
      "source": "Manual section 6 + The Yield Point workshop observations",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "FTC",
        "focus",
        "gas"
      ]
    },
    {
      "title": "How to Use Flight Cutting on a Gweike M-Series",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/flight-cutting/",
      "description": "Introduce M-Series flight cutting safely after ordinary cutting is stable, with suitable geometry, process checks, simulation, and a controlled comparison.",
      "evidence": "Official manual workflow + owner verification method",
      "models": "Supported M-Series CNC configurations",
      "safety": "High-speed coordinated motion",
      "source": "Manual section 10",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "FTC",
        "focus",
        "gas"
      ]
    },
    {
      "title": "How to Frame and Set the Origin on a Gweike M-Series",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/frame-and-origin/",
      "description": "Place an mLaser CNC job accurately without a camera by understanding origin modes, checking scale, and framing with laser output disabled.",
      "evidence": "Official manual workflow + owner workshop notes",
      "models": "CNC-equipped M2 and M3 families",
      "safety": "No-emission motion verification",
      "source": "Manual section 6",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser"
      ]
    },
    {
      "title": "Gweike M-Series CNC Cutting and Engraving",
      "url": "https://gweike-m-series.theyieldpoint.com/cnc-cutting/",
      "description": "The complete M-Series CNC workflow for fiber and CO2 jobs: file preparation, process selection, calibration, framing, simulation, cutting, and diagnosis.",
      "evidence": "Official manual + owner workshop notes",
      "models": "CNC-equipped M2 and M3 families",
      "safety": "Enclosed CNC laser operation",
      "source": "Manual sections 6 and 10",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "engraving",
        "FTC",
        "focus",
        "gas",
        "troubleshooting"
      ]
    },
    {
      "title": "Gweike M-Series Manuals, Software, Downloads, and Sources",
      "url": "https://gweike-m-series.theyieldpoint.com/downloads/",
      "description": "Direct links to the official Gweike M-Series manual archive, Windows software, tutorials, safety sources, owner community, and this wiki's machine-readable indexes.",
      "evidence": "Current source directory",
      "models": "M-Series only",
      "safety": "Verify downloads and machine compatibility",
      "source": "Primary links checked 2026-08-21",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M3",
        "welding",
        "LightBurn",
        "installation"
      ]
    },
    {
      "title": "How to Focus the Gweike M-Series Fiber and CO2 Heads",
      "url": "https://gweike-m-series.theyieldpoint.com/faq/fiber-focus/",
      "description": "Distinguish FTC stand-off, fiber process focus, and CO2 physical focusing on an M-Series; establish a repeatable reference without copying another machine's gauge.",
      "evidence": "Official manual + owner focus-gauge question",
      "models": "Fiber and CO2-equipped M-Series configurations",
      "safety": "Output disabled for setup; controlled test coupons",
      "source": "Manual sections 6 and rotary workflows",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "engraving",
        "FTC",
        "focus"
      ]
    },
    {
      "title": "Gweike M-Series File Formats and Design Software",
      "url": "https://gweike-m-series.theyieldpoint.com/faq/file-formats/",
      "description": "Prepare CAD, vector, and raster artwork for M-Series mLaser, choose a robust exchange format, and verify units, geometry, layers, and engraving after import.",
      "evidence": "Official mLaser workflow + current compatibility research",
      "models": "M2 and M3 families",
      "safety": "Simulate and frame every imported job",
      "source": "Manual sections 4 and 6",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "engraving",
        "LightBurn"
      ]
    },
    {
      "title": "Gweike M-Series Gas and Regulator Guide",
      "url": "https://gweike-m-series.theyieldpoint.com/faq/gas-guide/",
      "description": "Choose and verify oxygen, nitrogen, air, or shielding-gas hardware for M-Series cutting, welding, and cleaning without one unsafe universal value.",
      "evidence": "Official manual context + owner questions + gas-safety principles",
      "models": "M2 and M3 families",
      "safety": "High-pressure and oxygen service",
      "source": "Manual sections 1, 2, 6, 8, and 9",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "engraving",
        "welding",
        "gas"
      ]
    },
    {
      "title": "Gweike M-Series Frequently Asked Questions",
      "url": "https://gweike-m-series.theyieldpoint.com/faq/",
      "description": "Plain answers to common Gweike M-Series questions about LightBurn, mLaser, gas, regulators, file formats, focusing, model variants, and compatibility.",
      "evidence": "Official current sources + owner questions",
      "models": "M2, M3, M800, and M1200 families as noted",
      "safety": "Verify exact delivered configuration",
      "source": "Official documentation, product page, manual, and current support statements",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M2",
        "M3",
        "M800",
        "M1200",
        "mLaser",
        "cutting",
        "welding",
        "FTC",
        "focus",
        "gas",
        "LightBurn"
      ]
    },
    {
      "title": "Does the Gweike M-Series Work with LightBurn?",
      "url": "https://gweike-m-series.theyieldpoint.com/faq/lightburn-compatibility/",
      "description": "Current, date-stamped answer on LightBurn support for Gweike M2 and M3 Series machines and the safe software workflow in the meantime.",
      "evidence": "Direct statement from LightBurn staff",
      "models": "Gweike M2 and M3 families",
      "safety": "Do not force an unsupported controller profile",
      "source": "LightBurn forum statement dated 2026-04-07",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M2",
        "M3",
        "mLaser",
        "LightBurn"
      ]
    },
    {
      "title": "Gweike M2 vs M3, Pro, Max, and Ultra Guide Compatibility",
      "url": "https://gweike-m-series.theyieldpoint.com/faq/model-compatibility/",
      "description": "Map this wiki to current Gweike M2, M2 Pro, M2 Max, M2 Ultra, M3, M3 Pro, M3 Max, M3 Ultra, M800, and M1200 variants.",
      "evidence": "Current official Gweike product page",
      "models": "M-Series only",
      "safety": "Confirm serial-number configuration before applying a procedure",
      "source": "Gweike product page checked 2026-08-21",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M2",
        "M3",
        "M800",
        "M1200",
        "mLaser",
        "focus",
        "LightBurn"
      ]
    },
    {
      "title": "Convert a Gweike M-Series from CNC to Handheld Mode",
      "url": "https://gweike-m-series.theyieldpoint.com/handheld/change-to-handheld/",
      "description": "A configuration-controlled procedure for removing the CNC head and connecting the handheld head while protecting optics and restoring safety controls.",
      "evidence": "Official manual procedure, independently rewritten",
      "models": "Handheld-capable M2 and M3 families",
      "safety": "Source isolation and open-beam reconfiguration",
      "source": "Manual section 7",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "welding",
        "gas"
      ]
    },
    {
      "title": "How to Use Gweike M-Series Handheld Cutting Mode",
      "url": "https://gweike-m-series.theyieldpoint.com/handheld/handheld-cutting/",
      "description": "Prepare an M-Series handheld fiber cutting setup, contain the transmitted beam and sparks, run a test, and diagnose the result safely.",
      "evidence": "Official manual procedure + safety analysis",
      "models": "Handheld-cutting-capable M2 and M3 families",
      "safety": "Open-beam laser, transmitted beam, fire, fumes, hot metal",
      "source": "Manual section 9",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "focus",
        "gas"
      ]
    },
    {
      "title": "How to Set Up Gweike M-Series Handheld Laser Welding",
      "url": "https://gweike-m-series.theyieldpoint.com/handheld/handheld-welding/",
      "description": "Set up an M-Series handheld welding head, shielding gas, ground, wire feeder, and a controlled first weld while diagnosing unstable results.",
      "evidence": "Official manual workflow + primary fume guidance",
      "models": "Handheld-welding-capable M2 and M3 families",
      "safety": "Open-beam laser, fumes, hot metal, gas, wire feed",
      "source": "Manual section 8 and flat-plate workflow",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "welding",
        "gas"
      ]
    },
    {
      "title": "Gweike M-Series Handheld Welding, Cutting, and Cleaning",
      "url": "https://gweike-m-series.theyieldpoint.com/handheld/",
      "description": "Safely change an M-Series from CNC to handheld operation and set up welding, cutting, and laser cleaning without mixing configurations.",
      "evidence": "Official manual + primary safety sources",
      "models": "Handheld-capable M2 and M3 families",
      "safety": "Open-beam Class 4 laser work",
      "source": "Manual sections 7–9 and flat-plate procedures",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "fiber laser",
        "cutting",
        "welding",
        "laser cleaning",
        "gas"
      ]
    },
    {
      "title": "How to Use Gweike M-Series Laser Cleaning Safely",
      "url": "https://gweike-m-series.theyieldpoint.com/handheld/laser-cleaning/",
      "description": "Assess coatings, establish open-beam and fume controls, choose a conservative cleaning baseline, and evaluate an M-Series laser-cleaning test patch.",
      "evidence": "Official manual workflow + industrial-hygiene principles",
      "models": "Cleaning-capable M2 and M3 families",
      "safety": "Open-beam laser, contaminated plume, substrate damage, fire",
      "source": "Flat-plate and rotary cleaning manual sections",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "welding",
        "laser cleaning"
      ]
    },
    {
      "title": "Gweike M-Series Laser Manual & Troubleshooting Wiki",
      "url": "https://gweike-m-series.theyieldpoint.com/",
      "description": "Independent Gweike M-Series manual, step-by-step how-tos, FAQs, and symptom-first troubleshooting for M2, M3, Pro, Max, and Ultra owners.",
      "evidence": "Independent companion",
      "models": "Gweike M-Series",
      "safety": "See guide",
      "source": "See guide",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M2",
        "M3",
        "M800",
        "M1200",
        "mLaser",
        "cutting",
        "rotary axis",
        "FTC",
        "focus",
        "gas",
        "LightBurn",
        "maintenance",
        "troubleshooting",
        "installation",
        "pendant"
      ]
    },
    {
      "title": "Calculate Gweike M-Series Rotary Lead and Restore the Axes",
      "url": "https://gweike-m-series.theyieldpoint.com/rotary/calculate-lead-and-restore/",
      "description": "Calculate M-Series rotary lead from diameter and gear ratio, verify it without output, diagnose scale error, and restore the flat-bed configuration.",
      "evidence": "Official manual formula + independent verification method",
      "models": "Rotary-capable M2 and M3 configurations",
      "safety": "Configuration change and controlled motion",
      "source": "Rotary manual sections",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series"
      ]
    },
    {
      "title": "Gweike M-Series Rotary Axis Guide",
      "url": "https://gweike-m-series.theyieldpoint.com/rotary/",
      "description": "Set up M-Series rotary cutting, engraving, cleaning, welding, and quenching workflows while preserving and restoring the original flat-bed axis configuration.",
      "evidence": "Official manual + independent verification steps",
      "models": "Rotary-equipped M2 and M3 families",
      "safety": "Chuck, rotation, cables, open-beam modes",
      "source": "Rotary cutting, engraving, and shaft manual sections",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "engraving",
        "welding",
        "rotary axis"
      ]
    },
    {
      "title": "Gweike M-Series Rotary Cleaning, Welding, and Quenching",
      "url": "https://gweike-m-series.theyieldpoint.com/rotary/rotary-cleaning-welding/",
      "description": "Set up synchronized shaft rotation for M-Series laser cleaning, welding, or surface-treatment workflows with safe cable routing and a no-emission proof.",
      "evidence": "Official manual procedure + open-beam controls",
      "models": "Equipped M-Series handheld and rotary configurations",
      "safety": "Open beam, rotating shaft, plume, hot work",
      "source": "Flat-plate and rotating-shaft manual sections",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "welding",
        "laser cleaning",
        "gas"
      ]
    },
    {
      "title": "How to Use Gweike M-Series Rotary Cutting",
      "url": "https://gweike-m-series.theyieldpoint.com/rotary/rotary-cutting/",
      "description": "Set up and verify M-Series rotary tube cutting with fiber or CO2, including chucking, axis mapping, lead, path simulation, focus, and restoration.",
      "evidence": "Official manual procedure, independently rewritten",
      "models": "Rotary-capable M2 and M3 configurations",
      "safety": "Rotating stock, laser, gas, hot falling parts",
      "source": "Rotary shaft cutting manual section",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "FTC",
        "focus",
        "gas"
      ]
    },
    {
      "title": "How to Use Gweike M-Series Rotary Engraving",
      "url": "https://gweike-m-series.theyieldpoint.com/rotary/rotary-engraving/",
      "description": "Configure M-Series rotary engraving with fiber or CO2, calculate circumference scaling, preserve aspect ratio, test seam placement, and restore flat-bed parameters.",
      "evidence": "Official manual procedure, independently rewritten",
      "models": "Rotary-capable M2 and M3 configurations",
      "safety": "Rotating work and laser processing",
      "source": "Rotary shaft engraving manual section",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "engraving"
      ]
    },
    {
      "title": "Gweike M-Series Pre-Installation Requirements",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/before-delivery/",
      "description": "Plan access, floor space, power, gas, cooling water, extraction, networking, and rigging before a Gweike M-Series arrives.",
      "evidence": "Official manual + owner workshop notes",
      "models": "M2 and M3 families",
      "safety": "Site planning; qualified trades required",
      "source": "Manual section 1",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M3",
        "cutting",
        "welding",
        "gas",
        "installation"
      ]
    },
    {
      "title": "First Safe Fiber Test Cut on a Gweike M-Series",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/first-fiber-test-cut/",
      "description": "Validate a new Gweike M-Series with a small, controlled fiber test that separates motion, calibration, focus, gas, and process issues.",
      "evidence": "Official manual workflow + owner workshop method",
      "models": "Fiber-equipped M2 and M3 families",
      "safety": "Class 4 laser process, fire, hot metal, high-pressure gas",
      "source": "Manual sections 6 and 10",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "cutting",
        "FTC",
        "focus",
        "gas"
      ]
    },
    {
      "title": "Start Here — Gweike M-Series Setup",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/",
      "description": "A safe commissioning path for a new Gweike M-Series machine, from delivery planning through the first controlled test cut.",
      "evidence": "Official manual + owner workshop notes",
      "models": "M2 and M3 families",
      "safety": "Commissioning checklist",
      "source": "Manual sections 1–4",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "gas",
        "troubleshooting",
        "installation"
      ]
    },
    {
      "title": "How to Install the Gweike M-Series Laser Source and CNC Head",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/install-laser-source/",
      "description": "Install an M800 or M1200-class source and CNC fiber head while protecting the armored delivery fiber and optical interfaces.",
      "evidence": "Official manual procedure, independently rewritten",
      "models": "M-Series source-equipped configurations",
      "safety": "Delicate optics, heavy equipment, laser radiation",
      "source": "Manual section 3",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "M800",
        "M1200",
        "installation"
      ]
    },
    {
      "title": "How to Install mLaser and Connect a Gweike M-Series",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/install-mlaser/",
      "description": "Install mLaser on Windows, make a direct Ethernet connection, record network settings, and diagnose the connection by layers.",
      "evidence": "Official manual + owner troubleshooting",
      "models": "M2 and M3 families",
      "safety": "Control connection; laser remains disabled during setup",
      "source": "Manual section 4",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "installation"
      ]
    },
    {
      "title": "How to Unpack and Position a Gweike M-Series",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/unpack-and-position/",
      "description": "A damage-aware, safety-first sequence for receiving, unpacking, moving, leveling, and inspecting a Gweike M-Series laser.",
      "evidence": "Official manual + owner workshop notes",
      "models": "M2 and M3 families",
      "safety": "Heavy machinery and rigging",
      "source": "Manual section 1",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "gas",
        "installation",
        "pendant"
      ]
    },
    {
      "title": "Gweike M-Series Electrical, Gas, Cooling, and First Power-On",
      "url": "https://gweike-m-series.theyieldpoint.com/start-here/utilities-and-first-power/",
      "description": "Connect Gweike M-Series power, protective earth, cooling, gas, and extraction, then make a controlled first power-on.",
      "evidence": "Official manual + primary safety sources",
      "models": "M2 and M3 families",
      "safety": "High voltage, pressure, fumes, and laser interlocks",
      "source": "Manual section 2",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "gas"
      ]
    },
    {
      "title": "Diagnose a Gweike M-Series FTC Signal Wire Alarm",
      "url": "https://gweike-m-series.theyieldpoint.com/troubleshooting/ftc-signal-wire-alarm/",
      "description": "Triage an M-Series FTC signal wire alarm through nozzle, ceramic, material, connections, cable behavior, configuration, and support evidence.",
      "evidence": "Manual calibration context + unresolved owner report",
      "models": "M-Series CNC configurations with FTC height control",
      "safety": "Crash prevention; never bypass height/safety input",
      "source": "Manual section 10 + community report",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "FTC"
      ]
    },
    {
      "title": "Gweike M-Series Troubleshooting",
      "url": "https://gweike-m-series.theyieldpoint.com/troubleshooting/",
      "description": "A symptom-first Gweike M-Series fault-finding method covering mLaser connection, remote pendant, FTC alarms, laser-source diagnostics, cut quality, and maintenance.",
      "evidence": "Official manual + owner reports + conservative fault isolation",
      "models": "M2 and M3 families",
      "safety": "Diagnose without bypassing protections",
      "source": "Manual sections 2, 4, 5, 10, and source diagnostics",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "cutting",
        "FTC",
        "gas",
        "maintenance",
        "troubleshooting",
        "pendant"
      ]
    },
    {
      "title": "Gweike M-Series Maintenance Schedule",
      "url": "https://gweike-m-series.theyieldpoint.com/troubleshooting/maintenance-schedule/",
      "description": "A daily-to-annual M-Series schedule for optics, cooling, extraction, gas, motion, cables, backups, and safety controls.",
      "evidence": "Official maintenance context + owner-community schedule, reorganized",
      "models": "M2 and M3 families",
      "safety": "Isolate hazardous energy before service",
      "source": "Manual procedures + community maintenance discussion",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "gas",
        "maintenance"
      ]
    },
    {
      "title": "Fix mLaser Not Connecting to a Gweike M-Series",
      "url": "https://gweike-m-series.theyieldpoint.com/troubleshooting/mlaser-will-not-connect/",
      "description": "Diagnose a Gweike M-Series mLaser Ethernet connection from physical link through static IP, adapter routing, firewall, software version, and controller state.",
      "evidence": "Official manual + network fault isolation",
      "models": "M2 and M3 families",
      "safety": "Keep laser output disabled during connection tests",
      "source": "Manual section 4",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser"
      ]
    },
    {
      "title": "Fix a Gweike M-Series Remote Pendant or Handle Not Working",
      "url": "https://gweike-m-series.theyieldpoint.com/troubleshooting/pendant-not-working/",
      "description": "Separate pairing, USB receiver, Windows HID, software focus, and pendant hardware faults on a Gweike M-Series remote handle.",
      "evidence": "Official handle manual + real owner report",
      "models": "M-Series configurations with wireless remote handle",
      "safety": "Output disabled; motion area clear",
      "source": "Manual section 5 + community report",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser",
        "focus",
        "pendant"
      ]
    },
    {
      "title": "Read Gweike M-Series Laser Source Alarms and Logs",
      "url": "https://gweike-m-series.theyieldpoint.com/troubleshooting/read-laser-source-alarms/",
      "description": "Connect the supplied laser-source diagnostic software, read status and logs without changing service values, preserve evidence, and know when to stop.",
      "evidence": "Official manual procedure, independently rewritten",
      "models": "M-Series configurations with supported M800/M1200-class source workflows",
      "safety": "Read-only diagnostics; do not open or service the source",
      "source": "Laser source detection manual section",
      "updated": "2026-08-21",
      "keywords": [
        "Gweike M-Series",
        "mLaser"
      ]
    }
  ]
}