Official Gweike M-Series videos

#	Official video	Length	Wiki page
1	1. Unboxing & Installation	2:19	Unpack and position the machine
2	2. Electrical, gas, and power-on	2:41	Connect utilities and make the first power-on
3	3. Install fiber laser head on CNC platform	1:35	Install the laser source and CNC head
4	4. Software installation and connection	3:14	Install mLaser and connect the PC
5	5. CNC handheld controller	2:09	Pendant or remote handle not working
6	6. Software features overview	40:00	mLaser software overview
7	7. Cutting different materials	3:02	Cut and engrave in mLaser
8	8. Nozzle replacement	0:12	Replace nozzles, protective windows, and ceramics
9	9. CNC cutting and engraving	4:52	Cut and engrave in mLaser
10	10. Calibration, flying cut, share-edge cut	2:32	FTC calibration; related: flight cutting and nesting/share-edge work
11	11. Laser head removal and handheld cleaning	1:23	Convert from CNC head to handheld mode
12	12. Welding different thicknesses	1:34	Set up the wire feeder and weld
13	13. Handheld welding	1:54	Set up the wire feeder and weld
14	14. Handheld cutting	0:39	Use handheld cutting mode
15	15. Layout nesting	1:19	Nesting, leads, and tabs
16	16. Add lead line	0:42	Nesting, leads, and tabs
17	17. Micro-link	0:58	Nesting, leads, and tabs
18	18. Remove slag during piercing	1:16	Fix dross, blowouts, and incomplete cuts
19	19. Auto edge detection	0:46	Frame a job without a camera
20	20. Cutting sheet with film attached	1:21	Fix dross, blowouts, and incomplete cuts
21	21. Cutting powder-coated materials	0:49	Fix dross, blowouts, and incomplete cuts
22	22. Advertisement text (Gweike promo)	1:24	—
23	23. Automatic obstacle avoidance	0:47	Nesting, leads, and tabs
24	24. Replace protective lens	1:09	Replace nozzles, protective windows, and ceramics
25	25. Ceramic ring replacement	0:37	Replace nozzles, protective windows, and ceramics
26	26. Welding gun optical coaxial adjustment	1:10	Set up the wire feeder and weld
27	27. CNC CO₂ optical path alignment	1:54	CO₂ optical-path alignment
28	28. Replace water in chiller	0:50	Gweike M-Series maintenance schedule
29	29. Shield the FTC height controller	0:50	CNC-table welding and cleaning
30	30. CNC laser welding	2:47	CNC-table welding and cleaning
31	31. CNC laser cleaning	3:22	CNC-table welding and cleaning
32	32. Rotary axis installation	1:09	Rotary cutting with fiber or CO₂
33	33. Rotary axis operation	5:19	Rotary cutting with fiber or CO₂
34	34. CO₂ laser rotary axis engraving	2:30	Rotary engraving with fiber or CO₂
35	35. Advanced rotary axis operation	6:13	Calculate rotary lead and restore the axes
36	36. Laser system software monitoring	1:26	Read laser-source alarms and logs
37	37. Software upgrade	1:43	Install mLaser and connect the PC
38	38. 3 kW 1.5 MPa air compressor	4:01	Connect and verify the workshop air compressor
39	39. CO₂ laser lens inspection	1:37	Replace nozzles, protective windows, and ceramics
40	Visual alignment system (M-Series)	0:49	Visual alignment accessory
41	40. Replace the signal cable	4:44	Replace or reseat the FTC signal cable
42	41. Introduction to the coordinate system	2:12	Frame a job without a camera
43	42. CO₂ parameter library	2:01	Fiber and CO₂ parameter libraries
44	43. Fiber parameter library	1:43	Fiber and CO₂ parameter libraries
45	Gen 2 intelligent vision alignment (announcement)	1:56	Visual alignment accessory
46	Gen 2 vision alignment quick look	1:03	Visual alignment accessory
47	Gen 2 vision alignment step-by-step	0:55	Visual alignment accessory

¶ Official Gweike M-Series videos

¶ How these are used here

¶ The Yield Point tests and workshop stories