Owner-built reference // M-Series only

Gweike M-Series Laser Manual & Troubleshooting Wiki

The official manual tells you where the controls are. This independent library helps you prepare the shop, get a job running, understand what changed, and find the safest next check when it does not.

Start before delivery Open the fault finder

30+task and question-led guides

138official manual pages reviewed

15manual sections reorganized

Independent M-Series companionManual facts and workshop observations are labeled separately

M2 / M2 PRO / M2 MAX / M2 ULTRA M3 / M3 PRO / M3 MAX / M3 ULTRA M800 / M1200 SOURCE WORKFLOWS WHERE APPLICABLE

Browse by the job

Find the workflow, not a PDF chapter number

The library follows the way owners actually use the machine: prepare, connect, cut, weld, clean, diagnose, and restore the machine to a known state.

01 // Commission Delivery, utilities & first power

Shop requirements, rigging, cooling water, gas, exhaust, source installation, and mLaser connection.

Open start-here guides → 02 // CNC table Fiber & CO₂ cutting

Import a file, choose the correct source and process row, calibrate, frame, simulate, and run a controlled test.

Open CNC guides → 03 // Handheld Weld, cut & clean

Change the optical path safely, set up the wire feeder, confirm ground and gas, and start from verified parameters.

Open handheld guides → 04 // Rotary axis Tube & shaft work

Axis assignment, chuck setup, circumference geometry, rotary lead, and restoring the original platform configuration.

Open rotary guides → 05 // Diagnose Fault finding & maintenance

Connection failures, pendant trouble, FTC alarms, source logs, cut quality, and a maintenance schedule.

Open troubleshooting → 06 // Understand Common M-Series questions

LightBurn support, gas and regulator selection, focus, file formats, software workflow, and model compatibility.

Open common questions →

Symptom-first

What is the machine doing?

Choose the closest symptom. The first checks are conservative on purpose: confirm the setup before changing power, focus, service parameters, or wiring.

See the complete diagnostic method →

Choose a symptom Select the closest match… mLaser will not connect to the machine Remote pendant / handle does not respond FTC signal wire alarm Fiber cut does not go through Dross, blowout, or poor edge quality Handheld welding is unstable Rotary job is the wrong size or orientation Laser-source alarm or unexplained stop

Stop immediately for damaged optics, water leaks, exposed wiring, unexpected laser emission, fire, or any safety-interlock fault.

01

Select a symptom to see the first three checks and the most relevant M-Series guide.

AI-friendly by design

Ask ChatGPT with the M-Series wiki attached

The prompt supplies the canonical source and asks the model to cite an exact page. It also asks for a stop condition, reducing the chance of an improvised repair answer.

Copy, fill in the brackets, and paste into your AI tool Use The Yield Point's Gweike M-Series manual and troubleshooting wiki as your source: https://gweike-m-series.theyieldpoint.com/. My exact model is [MODEL]. I am trying to [JOB] and I see [SYMPTOM OR ERROR]. I already checked [CHECKS]. Give me the safest next diagnostic steps, tell me when to stop and contact support, and cite the exact wiki page(s) you used.

Copy prompt Machine-readable guide index →

Source policy

An original companion, not a copied manual

Procedures are paraphrased, reorganized around real jobs, and supplemented with explicit safety stop-points and field observations. Gweike's wording, diagrams, photographs, and PDF design are not reproduced. Every manual-derived page identifies its source section and links to the official download.

Official M-Series manual archive All official downloads and sources →